Wacker Neuson E1100, Руководство оператора, Страница: 90 / 162

ghi_tx001153gb.fm
90
Maintenance E 1100
7 Maintenance
7.1 Preparing for Maintenance
Do not perform even routine service (oil/filter changes, cleaning, etc.) unless all
electrical components are shut down. Use the checklist below to prepare this
machine for maintenance.
†
Move the start switch to “OFF”.
†
Open the circuit breakers (move to the “OFF” position).
†
Close the emergency stop switch (push in).
†
Disconnect the negative terminal on the battery.
†
Attach a “DO NOT START” sign to the control panel.
†
If the unit is connected to a remote start or transfer switch, make sure the
remote switch is also off and tagged.
7.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
Refer to the generator manufacturer’s operation manual for generator maintenance
procedures.
WARNING
A poorly maintained machine can malfunction, causing injuries or permanent
damage to the machine.
f
Keep the machine in safe operating condition by performing periodic mainte-
nance and making repairs as needed.
Task
Interval*
(hours of service)
Daily 2 Week Yearly
--- (50) (1200)
Inspect hose couplings.
3
Clean quick-connect couplings
3
Inspect hoses and connectors.
3
Visual walkaround inspection
3
* Use whichever comes first, calendar time or service hours.