manualshive.com logo in svg

Wacker Neuson E1100, Руководство оператора, Страница: 32 / 162

Поделиться
Скачать
Wacker Neuson E1100 Скачать руководство пользователя страница 32

Lifting and Transporting

E 1100

32                                       

wc_tx001902gb.fm

3.4

Before Towing Checklist

Before towing the machine, check the licensing requirements for trailers in your 
area. Also check the following items:

Hitch and coupler

†

Check that the towing vehicle and hitch have a rating equal to or greater than 
the GVWR of the machine. See 

Technical Data

.

†

Check that the hitch of the towing vehicle and coupler of the trailer are 
compatible.

†

Check the condition of both the coupler and hitch. 

†

Check that all fasteners on the coupler are secure.

†

Check that the coupler has fresh grease applied to it.

Wheels

†

Check that all lug nuts are in place and are properly torqued.

†

Check the tread wear of the tires. 

†

Check that the tires are inflated to the proper air pressure.

Trailer operation

†

Test the function of breakaway system. See 

topic Testing the Breakaway 

System (Battery and Brakes)

.

†

Check that the directional and running lights on the trailer function correctly.

†

Check that the safety chains of the trailer are connected to the towing vehicle 
using a crisscross pattern.

†

Check that the trailer’s breakaway cable is attached to the towing vehicle.

†

Check the operation of the trailer brakes by braking the towing vehicle at a slow 
speed. Both the vehicle and the trailer must brake smoothly. If the trailer 
pushes, check the fluid level in the surge brakes or the operation of the electric 
brakes.

  

Содержание E1100



































































































































































Отзывы:

Нет отзывов