Wacker Neuson E1100, Руководство оператора, Страница: 115 / 162

wc_tx003152gb.fm
115
E 1100 / HSH 350 Genset Maintenance
8.8 Cleaning the Oil Filter
Note: In the interests of environmental protection, place plastic sheeting and a
container under the machine to collect the liquid which drains off. Dispose of this
liquid properly.
Requirements
„
Standard tools
„
Machine on level surface
„
Oil drained from engine
„
Compressed air
Background Removing the oil filter will release oil from the engine if the oil is not drained. This
procedure should be performed when changing the engine oil.
Procedure Perform the procedure below to clean the oil filter.
1. Loosen the filter screw (a) and pull the oil filter (b) out of its housing.
This procedure continues on the next page.
WARNING
Most used oil contains small amounts of materials that can cause cancer and other
health problems if inhaled, ingested, or left in contact with skin for prolonged
periods of time.
f
Take steps to avoid inhaling or ingesting used engine oil.
f
Wash skin thoroughly after exposure to used engine oil.
WARNING
Burn hazard. Engine, engine oil, muffler, and exhaust pipes become extremely hot
during operation.
f
Stop the engine and allow the machine to cool before checking the oil or replac-
ing the engine oil or oil filter cartridge.
wc_gr009566
a
b