Wacker Neuson E1100, Руководство оператора, Страница: 31 / 162

E 1100 Lifting and Transporting
wc_tx001902gb.fm
31
3.3 Transporting the Machine on a Truck or Trailer
Requirements
„
Machine stopped
„
All doors and access covers closed and secured
„
Properly-rated ramps or docks
„
Properly-rated chains or straps
NOTICE: Do not run chains or straps across any painted surface. Failure to com-
ply may cause damage to your machine.
Procedure Perform the procedure below to transport on a flat bed truck or trailer.
1. Move the machine onto the flat bed truck using properly-rated ramps or docks.
NOTICE: Do not use the trailer jack to support the machine during transport.
2. If desired, remove the bolts (a) and pull out the trailer tongue (c) .
3. Rotate the tongue to a vertical position and insert the tube into the bracket.
4. Reinstall the bolts (e) to secure the tongue in a vertical position.
5. Rotate the trailer jack (b) to the horizontal position.
6. Secure the machine to the bed with properly-rated chains or straps (d) .
7. Install chocks (e) under both wheels.
Result The machine is ready to be transported.
WARNING
Crushing hazard. Improperly securing the machine can lead to a crushing hazard.
f
Use only the designated tie-down points to secure the machine.
wc_gr008709
a