manualshive.com logo in svg

Wacker Neuson DV60, Руководство оператора

Поделиться
Скачать
Wacker Neuson DV60 Скачать руководство пользователя страница 78

4-16

BA D24 en/us* 1.0 * D24_1_0_400.fm

 

4 Putting into operation

Rollbar

Rollbar 

A

 is included in the machine’s standard equipment.

DANGER

Accident hazard due to falling objects!

Causes serious injury or death.

► Vehicle operation is only allowed if the rollbar is raised and locked, and 

if the seat belt is fastened.

► Wear protective equipment (for example protective clothing, safety 

glasses).

► Operation in areas involving a risk of falling objects is prohibited.
► Operation in areas with fragments flying around is prohibited.

Drive with a folded down rollbar

In case of a low clearance height, the rollbar can be lowered for a short 
distance through a passage.

DANGER

Accident hazard during machine operation with a lowered rollbar!

Can cause serious injury or death.

► Only drive on flat and load-bearing subsurfaces.
► Do not fasten the seat belt in order to be able to leave the machine 

immediately in an emergency.

► Wear protective equipment (for example protective clothing, safety 

glasses).

However, the following conditions must be fulfilled:
• Obtain the approval of the appropriate national authority.
• Working with a lowered rollbar is prohibited under all circumstances.
• The machine must make no tipping movement.

Information

The rollbar weight is about 100 kg (220 lb) depending on the model. A gas 
strut is installed to support raising and lowering. However, inspite of the 
rollbar being equipped with a gas strut, only lower it with two qualified 
persons from the side of the machine.

Fig. 76 Rollbar

A

Содержание DV60





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды