Wacker Neuson DV60 страница 169 Скачать руководство пользователя

Страница: 169 / 212

BA D24 en/us* 1.0 * D24_1_0_700.fm

7-19

Maintenance 7

Filler inlet

for the fuel tank is located in the drive unit, on the rear left.

1. Stop and park the vehicle. Stop the engine

– see "Preparing

lubrication" on page 7-6

2. Unlock tank lock

with the starting key.

3. Open tank lock

carefully to release the pressure in the fuel tank.

4. Refuel.
5. Close and lock filler cap

Stationary fuel pumps

Even the smallest particles of dirt can cause increased engine wear,
malfunctions in the fuel system and reduced effectiveness of the fuel
filters.

Refueling from barrels

If refueling from barrels cannot be avoided, note the following points:
• Barrels must neither be rolled nor tilted before refueling.
• Protect the suction pipe opening of the barrel pump with a fine-mesh

screen.

• Immerse the suction pipe opening down to a max. 15 cm (6 in) above

the bottom of the barrel.

• Only fill the tank using refueling aids (funnels or filler pipes) with an

integral microfilmer.

• Keep all refueling containers clean.

Fig. 162

Содержание DV60





















































































































































































































Результаты поиска

Содержание DV60

Отзывы:

Похожие инструкции для DV60

Бренды по названию

Популярные бренды

Wacker Neuson DV60, Руководство оператора

Результаты поиска

Содержание DV60

Отзывы:

Похожие инструкции для DV60

Бренды по названию

Популярные бренды