Wacker Neuson DV60 Скачать руководство пользователя страница 40

Страница: 40 / 212

2-24

BA D24 en/us* 1.0 * D24en_us_1_0_200c.fm

2 Safety

Behavior during thunderstorm

• Stop machine operation if a thunderstorm is gathering, stop the

machine, secure and leave it, and avoid being near it.

Noise

• Observe the noise regulations (for example, during applications in

enclosed premises).

• Bear in mind external sources of noise (compressed-air hammer,

concrete saw).

• Do not remove the sound baffles of the machine/attachment.
• Have damaged sound baffles immediately replaced (for example, an

insulating mat, muffler).

• Before starting work, get informed on the noise level of the machine/

attachment (for example on the adhesive label) – wear ear protectors.

• Do not wear ear protectors during machine travel on public roads/sites.

Cleaning

• Risk of injury from compressed air and high-pressure cleaners.

- Wear appropriate protective clothes.

• Do not use any dangerous and aggressive detergents.

- Wear appropriate protective clothes.

• Operate the machine only in a clean condition.

- Remove all dirt, snow and ice from climbing aids (for example from

the handholds, footholds, handrails).

- Keep the cabin glazing and visual aids clean.
- Keep the light system and reflectors clean.
- Keep the control elements and indicators clean.
- Keep the safety, warning and information labels clean, and replace

damaged and missing labels by new ones.

• Perform cleaning work only if the engine is stopped and cooled down.
• Bear in mind sensitive components and protect them accordingly (for

example electronic control units, relays).

Содержание DV60





















































































































































































































Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson DV60, Руководство оператора

Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды