Wacker Neuson DV60 Скачать руководство пользователя страница 142

Страница: 142 / 212

6-2

BA D24 en/us* 1.0 * D24_1_0_600.fm

6 Transportation

WARNING

Crushing hazard due to vehicle rolling away under its own weight
after parking it!

Serious injury or death can be caused by not securing the vehicle.

► The machine may only be towed on level ground or uphill.
► Secure the machine at the tie-down points with slings of sufficient

dimensions.

► Secure the machine with chocks to prevent it from rolling.

NOTICE

The vehicle can be damaged during towing.
► Tow the machine away only from the immediate danger zone until it

can be loaded.

► Do not tow the vehicle if it is stuck or on a slope. Load the vehicle.
► Only tow the machine using suitable towing equipment in connection

with suitable towing facilities, such as a towing hooks, eyes, etc.

► A tractor vehicle of the same weight category must be used as a

minimum.
In addition, the tractor vehicle must be equipped with a safe braking
system and sufficient tractive power.

Information

The manufacturer’s warranty shall not apply to accidents or damage
caused by towing.

1. Apply the parking brake.
2. Secure the machine with chocks to prevent it from rolling.

Fig. 144

Содержание DV60





















































































































































































































Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson DV60, Руководство оператора

Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды