manualshive.com logo in svg

Wacker Neuson DV60, Руководство оператора

Поделиться
Скачать
Wacker Neuson DV60 Скачать руководство пользователя страница 27

BA D24 en/us* 1.0 * D24en_us_1_0_200c.fm 

2-11

Safety 2

2.6

Trailer operation

Trailer operation

• The vehicle must be certified for trailer operation.
• Observe the national regulations for trailer operation.
• The specific national driving license is required.
• Carrying passengers on/in trailers is PROHIBITED.
• Observe the maximum permissible vertical and trailer load.
• Do not exceed the permissible trailer speed.
• Trailer operation with the towing gear of the vehicle is prohibited.
• Trailer operation changes the vehicle’s operating behavior; the 

operator must be familiar with this and act accordingly.

• Bear in mind the vehicle’s steering mode and the trailer’s turning circle.
• Before hitching/unhitching the trailer, secure it to prevent it from rolling 

away (for example with the parking brake, suitable wheel chocks).

• There must be nobody between the vehicle and the trailer when 

hitching a trailer.

• Hitch the trailer onto the vehicle correctly.
• Ensure that all equipment works correctly (for example the brakes, 

lights).

• Before starting vehicle travel, ensure that nobody is between the 

vehicle and the trailer.

2.7

Attachment operation

Attachments

• Use only attachments that are certified for the machine or its protective 

equipment (for example a shatter protection).

• All other attachments require the vehicle manufacturer’s release.
• The danger zone and the work zone depend on the attachment used – 

see the Operator’s Manual of the attachment.

• Secure the load.
• Do not overload attachments.
• Check the correct position of the lock.

Содержание DV60





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды