manualshive.com logo in svg

Wacker Neuson DV60, Руководство оператора

Поделиться
Скачать
Wacker Neuson DV60 Скачать руководство пользователя страница 29

BA D24 en/us* 1.0 * D24en_us_1_0_200c.fm 

2-13

Safety 2

2.8

Towing, loading and transporting

Towing

• Seal off the danger zone.
• Ensure that no one is near the towing bar or cable. The safety distance 

is equal to 1.5 times the length of the towing equipment.
Use a towing cable for vehicles with a total weight of up to 4.0 tons.
Use a towing bar for vehicles with a total weight of over 4.0 tons.

• Observe the mandatory transport position, permissible speed and 

itinerary.

• A tractor vehicle of the same weight category must be used as a 

minimum. Furthermore, the tractor vehicle must be equipped with a 
safe braking system and sufficient tractive power.

• Use only towing bars or cables certified by a test/certification body, 

observe the inspection intervals.

• Do not use any towing bars or cables that are dirty, damaged or not of 

sufficient size.

• Fasten towing bars or cables only at the defined points.
• Tow away only in accordance with this Operator’s Manual to avoid 

damage to the vehicle.

• Observe the national regulations (for example the light regulations) 

when towing on public roads/sites.

Содержание DV60





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды