Wacker Neuson DT10 Скачать руководство пользователя | Manualshive

Страница: 55 / 120

background image

BA DT10 en - Edition 1.5 * dt10b340.fm

3-25

Operation

1.51.53

3.6

Machine operation

General safety instructions

• Never drive up to the edge of a pit from outside – risk of cave-in!
• Do not operate the machine under projecting earth. Stones or the projecting earth can

fall onto the machine.

• When working on roofs of buildings or other structures, these are to be checked for

stability before starting work; The building can collapse, causing serious injury and
damage.

• Do not position the machine directly underneath the workplace during demolition,

otherwise demolished parts can fall onto the machine or the building can collapse,
causing serious injury or damage.

• Operation of the machine by unauthorized personnel is prohibited!
• The hydraulic system of the machine is still pressurized even when the engine is not

running! Release the pressure in the sections of the system and hydraulic lines that are
to be opened before starting setup or repair work, for example fitting/removing an
attachment with hydraulic functions.

• Before tilting out the skip next to an excavation, secure the machine with suitable wheel

chocks or other auxiliary means.

• Always watch the material as you tilt out the skip: ensure that the material is dumped

out evenly and does not remain stuck in the skip, otherwise the machine could tip over.

• Do not dump the load when working on sloping ground.
• Transporting persons or animals in the skip is prohibited.
• When transporting material, actuating the skip and/or the loader unit (option) is

prohibited!

• Always perform precise and smooth control movements, do not perform abrupt

movements.

• Do not get off the machine when it is moving.
• Avoid hazardous work conditions on the job site, do not work in severe weather and

ensure that no one is at risk.

• Transporting persons is prohibited.

Loader unit operation

The following section describes work operations with the machine equipped with the
loader unit. The loader unit is mainly used for earth-moving applications, and for loosening,
picking up and loading loose material.

Transporting with a full bucket

Caution!

No transport of material: the loader unit is designed for loading loose material
only.

☞

Loading loose material is described below

☞

Only load material with the skip tilted in

«
...
53
54
55
56
57
...
»

Содержание DT10

























































































































Отзывы:

Нет отзывов

Похожие инструкции для DT10

Бренд: York Fitness Страницы: 34

Бренд: C.M.O Страницы: 10

Бренд: GE Страницы: 698

Бренд: VeEX Страницы: 2

Бренд: JB-Lighting Страницы: 48

Бренд: Wavetek Страницы: 74

Бренд: Fairchild Страницы: 16

Бренд: Malmet Страницы: 14

Бренд: Zempire Страницы: 2

Бренд: 3M Страницы: 48

Бренд: 3M Страницы: 19

Speedglas G5-01

Бренд: 3M Страницы: 62

Quickfit Nexus Exit

Бренд: Thomas & Betts Страницы: 2

Бренд: Cambridge Audio Страницы: 2

Бренд: Cameo Страницы: 64

Бренд: Cameo Страницы: 100

Бренд: CAME Страницы: 32

BODY ARMOR PRO TERM

Бренд: Darco Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды