Wacker Neuson DT10 Скачать руководство пользователя

Страница: 43 / 120

BA DT10 en - Edition 1.5 * dt10b330.fm

3-13

Operation

Starting vehicle travel

After starting the engine:

☞

Slowly actuate the drive lever

➥

Machine travel starts

Danger!

Never move control levers too fast:

Accident hazard, the machine can tip over!

☞

Perform precise and smooth movements with the control levers.

Danger!

The machine has no rearview mirrors –

Accident hazard when reversing!

☞

The operator must be guided by another person if he does not have suffi-
cient visibility to the rear.

Drive levers

Caution!

Never operate the machine with the skip tilted out and with the loader unit
lowered.

☞

Tilt in the skip.

☞

Raise the loader unit.

The drive movements of the machine are controlled with drive levers

and

Notice!

Ensure that both tracks move as you change direction, otherwise the rubber tracks
are subject to increased abrasion.

Fig. 34: Drive levers

Position

Function

• A
• B

Push forwards

Track dumper moves forward

• C
• D

Pull backward

Track dumper moves backward

• C
• B

Pull backward

Push forward

Track dumper turns to the left

• A
• D

Push forward

Pull backward

Track dumper turns to the right

Содержание DT10

























































































































Результаты поиска

Содержание DT10

Отзывы:

Похожие инструкции для DT10

Бренды по названию

Популярные бренды

Wacker Neuson DT10, Руководство оператора

Результаты поиска

Содержание DT10

Отзывы:

Похожие инструкции для DT10

Бренды по названию

Популярные бренды