VTS Medical Systems WPG-25-070-10, Техническая документация инструкция

Страница: 9 / 32

8
Electric connection for the valve actuator
To make electrical connection of the valve actuator use cable 3x 075mm2 according to below scheme
In the any other option refer to the manual delivered with valve actuator.
Both of them can be connected to VTS control system in case of ordering VTS AHU with full automation.
Notes
11.
Connect via safety isolation transformer.
12. Direction of rotation switch is covered.
Factory setting: Direction of rotation Y2
Control of controller
Meassuring voltage for reset
signal
Direction of rotation
Wiring diagram Standard connection