Vtronix LAKEPRO-1 Скачать руководство пользователя страница 75

Страница: 75 / 84

FCC Note

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

Содержание LAKEPRO-1





















































































Результаты поиска

Содержание LAKEPRO-1

Отзывы:

Похожие инструкции для LAKEPRO-1

Бренды по названию

Популярные бренды

Vtronix LAKEPRO-1, Руководство пользователя

Результаты поиска

Содержание LAKEPRO-1

Отзывы:

Похожие инструкции для LAKEPRO-1

Бренды по названию

Популярные бренды