41
Use the keyboard or mouse (recommended) to set each field. Ensure each field is set correctly before clicking OK. If
parameters are set incorrectly it could result in the display becoming unreadable and very difficult to correct.
GPIO
The GPIO (general purpose input output) menu enables you to view the status of the input and output devices such as switches,
sensors, LEDs, and so on and view their status. These devices can be attached to the unit to turn external alarms (outputs) on or
off when the specified input changes. When an alarm has been triggered, the GPI and GPO that are connected will show the
status of the input or output device. GPI devices will show NC (normally closed) orNO (normally open) as the status of the
switch. Depending on the input, you can change the status of the GPO devices to On or Off as required.
Change the GPO status as needed. Make sure that the devices are working by checking the actual physical status of the inputs
and outputs after making changes in this menu.
NOTE: Enable GPIO function may cause system efficiency drop down.
TCP/IP
Use the TCP/IP menu to enter TCP/IP address details for the VP-101.
