18
Note:
1. You can use the Prev Page and Next Page buttons on the remote control to toggle between the COM1 menu
and COM2 menu.
2. When an optional GPIO module is connected to the serial port, the VP- 101 detects it automatically and
provides GPIO options in the system menu.
3.3.10 System
information
Use the System Information option to display the System Information screen and view information about the boot disk,
TCP/IP parameters, the MAC ID of the device, firmware version and date of installation, model number, and hard disk
properties.
3.3.11 Date/Time
Use the Date/Time option to set the year, month, day, hour, minute, second, and time zone in which the VP- 101 is
installed.
To set the time or time zone:
1.
Use the Up and Down arrow buttons to select the field to change.
2.
Use the Left arrow to decrease the value and the Right arrow to increase the value for that field.
3.
Press the OK button when the values are set correctly.
Note: The VP- 101 reboots to save the changes, if you modify the time zone.
