24
3.3.14 Registry
server
The Registry Server menu enables you to set up the registry server for your device. If you are using a dynamic IP
address for the VP- 101, you can set up the device to post its IP address to the DVR registry server. You can then look
up your IP from the MAC address or server name. You can also use the registry server to give a name to the VP- 101 as
described in Set names and on-screen display on page 83.
To enter Registry Server details:
1.
Use the Up and Down arrow buttons to select a field to change.
2.
Press the Right arrow button to confirm.
3.
Press the Key Pad button on the remote control to display the on-screen keyboard.
4.
Use the Arrow buttons to select letters and numbers from the on-screen keyboard and use the OK button to
confirm.
5.
When the field is correct, press the Key Pad button to turn off the on-screen keyboard.
6.
Press the OK button to confirm the new field.
3.3.15 Running
mode
Use the Running Mode menu to switch between Network Mode and ISP Mode, and between Mouse Mode and IR
Remote Control Mode.
3.3.16 Algorithm
You can change the compression algorithm used by the VP- 101 to record video.
To set up the algorithm:
1.
Use the Up and Down arrow buttons to select a field to change from the Algorithm menu.
2.
Use the Right and Left arrow buttons to toggle the available options.
3.
Press the OK button when the fields are set correctly.
3.3.17 NTP
setup
Use the NTP (Network Time Protocol) Setup function to synchronize the real-time clock on the VP- 101 with the
atomic clock. Before using this feature, make sure that the correct date, time and time zone have been set up. Also make
sure that the DNS IP number has been set up under the TCP/IP settings. The following options are available in the
submenu:
Enable -
enables the NTP function to synchronize the real-time clock.
