25
Period (Hour) -
sets up the time interval after which the time is re-synchronized.
Server -
selects the NTP server from several pre-defined choices.
Edit NTP Server -
enables you to choose your own NTP server.
Test&Save? -
tests the server and saves the changes.
To change NTP settings:
1.
Use the Up and Down arrow buttons to select a field to change from the NTP menu.
2.
Press the Right button to confirm.
3.
Press the Key Pad button on the remote control to display the on-screen keyboard.
4.
Use the Arrow buttons to select letters from the on-screen keyboard and use the OK button to confirm.
5.
When the field is set correctly, press the Key Pad button on the remote control to turn off the on-screen keyboard.
6.
Press the OK button to save changes.
3.3.18 Default
settings
Use the Default Settings option to reset all configurable parameters to their factory default settings. When the Default
Settings option is chosen from the System Setup menu, a message is displayed asking you to confirm. Press the OK
button to confirm, or the Cancel button to cancel the operation.
3.3.19 Revise
firmware
Use the Revise Firmware option to upgrade the firmware in the VP- 101. The firmware can be revised through an
external read-write CD drive, a USB flash drive, or a USB thumb drive. Connect the device to the VP- 101 and then use
this option.
