13
3.3.5 OSD
text
A line of text can be displayed with the video from each camera connected to the VP- 101. Use the OSD Text menu to enable
the text and alter it. You can also set the position of the text using the X and Y parameter values. Increasing the value of Y
moves the text down the screen. Increasing the value of X moves the text to the right.
To alter the text position:
1.
Use the Up and Down arrow buttons on the remote control to highlight X or Y.
2.
Use the Right button to increase the value and the Left button to decrease the value.
3.
Press the OK button when the value is correct.
Use the on-screen keyboard to alter the OSD text as follows:
1.
Use the Up and Down arrow buttons on the remote control to highlight the Text option.
2.
Use the Right arrow button to confirm.
3.
Press the keypad button on the remote control to display the on-screen keyboard.
4.
Use the Arrow buttons to highlight the letters you need for your text and press the OK button to choose them.
5.
When your text is complete, press the Keypad button to remove the on-screen keyboard.
6.
Press the OK button to save the new text.
3.3.67 TCP/IP
Use the TCP/IP menu to set the IP address of the VP- 101, the gateway, the subnet mask, the DNS server IP address, and the
HTTP port. If you want to use the VP- 101 on your network, see your network administrator to obtain a valid IP address for the
VP- 101.
To change the TCP/IP parameters:
1.
Select the field to change using the Up and Down arrow buttons.
