VZR.2515.001IM
CUBE C-05 tripod turnstile
Installation Manual
11
4
PRODUCT INSTALLATION AND DISMANTLING
4.1 Equipment required
Equipment to be used for the turnstile installation:
1)
electric perforating machine
2)
12 mm carbide drill bit for drilling anchor holes in the floor (we recommend to use the
anchor with the screw of the FHII 12/15 SK type);
3)
S5 key for the screws with an internal hexagon;
4)
slot head screwdriver;
5)
plumb or level;
6)
steel shims for turnstile leveling;
7)
round file;
8)
side-cutting pliers.
4.2 Product installation
ATTENTION:
CAREFULLY READ THIS SECTION OF THE MANUAL
BEFORE INSTALLING THE PRODUCT
4.2.1
Prepare a horizontal area at the product installation site.
4.2.2
Prepare a chase or cable conduit going from the site to the place
of installation of the PSU, CP and, where necessary, to the ACS and SFAS
connection point.
