VZR.2515.001IM
CUBE C-05 tripod turnstile
Installation Manual
23
CONNECT THE TURNSTILE USING POWER CABLE WITH CROSS-
SECTION BELOW 1.5 MM
2
WHEN LENGTH OF THE SUPPLY CABLE IS
MORE THAN 10 M
– IT IS RECOMMENDED TO USE CABLE WITH CROSS-
SECTION OF 2.5 MM
2
.
ATTENTION:
IT IS NOT RECOMMENDED TO INSTALL POWER SUPPLY
UNIT AT A DISTANCE OF MORE THAN 25 M FROM THE TURNSTILE.
The turnstile is powered by 12 V DC power supply. The maximum
consumption is 4.5 A. The PSU should be selected on the basis of these
parameters.
It should also be taken into account that voltage drop increases when the
supply cable length is increased (operating voltage range is provided in the
Operation Manual VZR.2515.001 OM).
Install PSU in a place providing easy operator access.
Connect the PSU cable to POWER +12U and GND terminal group on the
control board.
Make sure that the cable is securely connected.
The POWER block has additional power supply terminals for connecting an
external controller.
