![Vorsis HD P3 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/vorsis/hd-p3/hd-p3_technical-manual_1050410009.webp)
G E N E R A L I N F O R M A T I O N
page 1 – 3
HD P3 / Aug 2006
I/O Connections
All audio input and output, control, Ethernet, and power supply
connections are made via various connectors mounted on HD P3’s rear
panel. Seven XLR connectors are provided for analog and digital audio
input and output, and all the audio connections also appear on the DB-25
connector. An RJ-45 connector is provided for Ethernet connections. The
DB-9 connector provides 8 GPI inputs for the most used presets. The
pinout drawings on pages 1-8 and 1-9 summarize all wiring connections.
Inputs
Both HD P3 processor signal paths can be fed from two different types
of inputs: analog line level and AES-3 digital.
Two female XLR connectors, or the appropriate pins on the DB-25
AUDIO I/O connector, are available for line level analog audio input
(n4dBu balanced) connections. The analog line inputs exhibit a
bridging impedance and can handle signals up to +20dBu.
A third female XLR connector is available to handle digital line level
sources; this AES-3 digital input is also available on the DB-25 connector.
The HD P3 will accommodate digital inputs having sample rates of
44.1kHz or 48kHz. The internal sample rate of the HD P3 will automati-
cally sync up to the applied input signal’s valid sample rate, allowing the
HD P3 to be used in an existing digital system. AES sources are by design
stereo; if the HD P3 is not set to be stereo the appropriate Left or Right
signal within the AES stream will be applied to the signal path.
Line In—XLR-F
Pin 1 XLR1 SH – LINE 1 IN SH
Pin 2 XLR1 HI – LINE 1 IN HI
Pin 3 XLR1 LO – LINE 1 IN LO
Pin 1 XLR2 SH – LINE 2 IN SH
Pin 2 XLR2 HI – LINE 2 IN HI
Pin 3 XLR2 LO – LINE 2 IN LO
AES I
N
—XLR-F
Pin 1 XLR SH – AES IN SH
Pin 2 XLR HI – AES IN HI
Pin 3 XLR LO – AES IN LO