voran EP 1000 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 40

voran EP 1000 Скачать руководство пользователя страница 9

De-stoning machine EP 1000

Version: 136401000_M0014772F_EN400/50D
Datum: 15.01.2021

- 9 / 40 -

1.6 Safety devices

The machine/line may only be used either in the course of normal operation or in servicing/repair operation when
all required safety devices are used and are effective.

the following safety regulations have been introduced in order to reduce the remnant risk from the machine/line to
an absolute minimum:

- The Operating Manual describes the sources of risk and the orderly behaviour of the
operating, servicing and repair personnel.
- Notices on the machine/line marking sources of risk!

e.g.:

Picture 1.6-1) Caution live voltage!

NOTE!

The safety devices must not be left aside nor made in effectual.

Where this is not assured no liability can be accepted.

safety devices must be checked monthly.

Notices must be easy to recognise.

Electrical safety devices

WARNING AGAINST GENERAL DANGERS

All electrical safety devices must be connected and functional at all times.
they must not be electrically bridged!
Before quitting any activated safety devices it must be ensured that no persons are in the danger
areas.

The electrical safety devices include for example:

- main switch
- emergency stop-switch and button
- energy supply cables
- any operator controls and control stands if these are provided

«
...
7
8
9
10
11
...
»

Содержание EP 1000









































Отзывы:

Нет отзывов