Volvo XC 90 2016, Руководство пользователя

Страница: 300 / 570

DRIVER SUPPORT
* Option/accessory, for more information, see Introduction. 298
Park Assist Camera (PAC)
*
guiding
lines and fields
The Park Assist Camera system uses guiding
and lines and fields to indicate the vehicle's
position in relation to its immediate surround-
ings.
Guiding lines
Sample guidelines
The lines on the screen are projected as if they
were a path on the ground around the vehicle
and are directly affected by the way in which the
steering wheel is turned. This enables the driver
to see path the vehicle will take, even if he/she
turns the steering wheel.
These lines also indicate the outermost limits that
any object (door mirrors, corners of the body, a
trailer hitch, etc.) extends out from the vehicle,
even when it turns.
NOTE
When backing up with a trailer, the guiding
lines show the path that the
vehicle will take,
not the trailer.
WARNING
Keep in mind that when the rear camera has
been selected, the image on the screen only
shows the area behind the vehicle. The driver
must always watch for people, animals, other
vehicles, etc., near the sides or the front of the
vehicle when turning while backing up.
The opposite is true when the front camera is
selected.
Please note that the guiding lines show the
shortest path. Be sure that the vehicle’s sides
do not come into contact with or scrape
against any obstacle/obstruction when the
steering wheel is turned while driving forward
or that the front of the vehicle does not come
into contact with or scrape against any obsta-
cle/obstruction when backing up.
Models with the 360° panorama camera
system and Park Assist sensors
*
On models with the 360° panorama camera sys-
tem, guiding lines will be shown in front of or to
the sides of the vehicle, depending on its direc-
tion.
•
When driving forward: front lines
•
When backing up: side/rear lines
Location of the cameras and their fields of vision
With 360° view selected, the center display will
show views from all of the parking cameras.
To select a specific camera, tap its "field of
vision."