Volvo XC 90 2016, Руководство пользователя

Страница: 206 / 570

LOADING AND STORAGE
* Option/accessory, for more information, see Introduction. 204
Electrical sockets
There are two 12-volt sockets in the tunnel con-
sole, a 120-volt socket on the rear side of the
tunnel console, and one 12-volt socket in the
cargo area
*
.
120-volt socket in the tunnel console
120-volt socket in the tunnel console for the second
row of seats
This socket is intended for 120-volt devices such
as laptops, chargers, etc.
The max. current provided is 150W.
Using the socket
1. Pull down the cover over the socket and plug
in the device.
> The socket's indicator light will indicate its
status. The socket can only provide elec-
trical current when the light is green.
2. Disconnect the device by pulling its plug, not
its cord.
Pull up the cover over the socket when it is not in
use.
CAUTION
•
Do not connect devices with large or
heavy plugs that could come loose while
driving.
•
Do not use devices that can cause inter-
ference with the vehicle's radio receiver
or electrical system.
WARNING
•
Be sure to place any devices connected
to the socket safely so that they do not
become projectiles in the event of a sud-
den stop and injure the occupants of the
vehicle.
•
Be aware that connected devices may
generate heat and become very hot.
•
Only connect devices that function cor-
rectly and are free from defects. These
devices should be intended for use in a
120-volt, 60Hz socket with a plug
intended for the socket in the vehicle and
be UL-approved (or the equivalent
thereof).
•
Never let the device, its plug or the
socket itself come in contact with fluids
of any kind. Never touch or use the
socket if it appears to be damaged or
wet.
•
Never connect multiple plugs, adapters or
extension cords to the socket. This could
override the socket's safety functions.
•
Never let children play or tamper with the
socket, or attempt to insert any objects
into it. Never leave children unattended in
the vehicle when the socket is active.
•
Never try to modify or repair the 120-volt
socket. This should only be done by a