Volvo S 90 2017, Руководство пользователя

Страница: 537 / 570

MAINTENANCE AND SERVICING
}}
* Option/accessory. 535
components such as chromed strips on the exte-
rior of your vehicle. The instructions for using
these products should be followed carefully. Sol-
vents or stain removers should not be used.
The frames around the side windows, roof rails
and door frames near the windows
*
are made of
anodized aluminum and should only be washed
with a cleaning product with a pH value between
3.5 till 11.5.
Components that should be washed with a cleaning
product with a pH value between 3.5 till 11.5
CAUTION
•
Avoid waxing or polishing plastic or rub-
ber components
•
Polishing chromed strips can wear away
or damage the surface
•
Polishes containing abrasive substances
should not be used
Related information
•
Paint damage (p. 539)
•
Corrosion protection (p. 536)
•
Polishing and waxing (p. 535)
•
Windshield wipers in the service position
(p. 513)
Polishing and waxing
Normally, polishing is not required during the
first year after delivery, however, waxing may be
beneficial.
•
Before applying polish or wax the vehicle
must be washed and dried. Tar spots can be
removed with kerosene or tar remover. Diffi-
cult spots may require a fine rubbing com-
pound.
•
After polishing use liquid or paste wax.
•
Several commercially available products con-
tain both polish and wax.
•
Waxing alone does not substitute for polish-
ing a dull surface.
•
A wide range of polymer-based waxes can
be purchased today. These waxes are easy to
use and produce a long-lasting, high-gloss
finish that protects the bodywork against oxi-
dation, road dirt and fading.
•
Do not polish or wax your vehicle in direct
sunlight (the surface of the vehicle should
not be warmer than 113 °F (45 °C).