Volvo S 90 2017, Руководство пользователя

Страница: 140 / 570

INSTRUMENTS AND CONTROLS
138
Lighting panel and controls
The lighting ring on the left-side steering wheel
lever can be used to activate the vehicle's exte-
rior lighting.
Instrument lighting brightness can be adjusted
using the thumb wheel on the lighting panel.
Lighting ring on the left-side steering
wheel lever
Lighting
ring posi-
tion
Result
With the ignition in mode II or if
the engine is running:
•
In the
US
: the Daytime Run-
ning Lights (DRL) will be
off
•
In
Canada
: the Daytime Run-
ning Lights will be
on
•
High beam flash can be used
With the ignition in mode II or if
the engine is running:
A
•
Parking lights will be
on
•
In the
US
: the Daytime Run-
ning Lights will be
off
•
In
Canada
: the Daytime Run-
ning Lights will be
on
•
High beam flash can be used
With the ignition in mode II or if
the engine is running:
•
The Daytime Running Lights
will be
off
•
The low beam headlights will
be
on
•
High Beams/High Beam
flash can be used
Lighting
ring posi-
tion
Result
With the ignition in mode II or if
the engine is running:
•
The Daytime Running Lights
will be
on
in daylight condi-
tions
B
•
The low beam headlights will
automatically switch on in
dark conditions
•
Tunnel detection will be acti-
vated
•
Active High Beams (AHB)
can be activated
•
High beam flash can be used
•
Continuous high beams can
be used in dark conditions
Active High Beams On/Off
A The parking lights will be on in this position, even if the ignition
is switched off. In dark conditions, the rear parking lights illumi-
nate automatically when the tailgate is open, regardless of the
ring's position or ignition mode.
B US models only: The use of Daytime Running Lights can be
activated/deactivated in the center display's Settings menu.