Volvo S 90 2017, Руководство пользователя

Страница: 311 / 570

DRIVER SUPPORT
}}
309
3: Auto-brake
The brakes will be applied automatically.
If the driver has not taken action at this stage and
a collision is imminent, auto-braking will be trig-
gered. Full braking effect will be used to avoid
the collision if possible or to make the speed at
the point of impact as low as possible.
In certain situations, auto-braking may begin with
limited effect before full braking is used.
If City Safety has prevented a collision, the vehi-
cle will be kept at a standstill until the driver
takes action. If the vehicle has slowed to avoid
colliding with the vehicle ahead, your speed will
be reduced to that vehicle's speed.
When auto-brake is triggered, the seat belt pre-
tensioners may also be activated, see the article
"Seat belts" for additional information.
Auto-braking can be cancelled if the driver
presses hard on the accelerator pedal.
When City Safety applies the brakes, the brake
lights will illuminate.
When City Safety is triggered and applies the
brakes, a text message will be displayed in the
instrument panel.
Related information
•
City Safety in crossing traffic (p. 313)
•
City Safety limitations (p. 314)
•
City Safety symbols and messages (p. 317)
•
Detecting obstructions with City Safety
(p. 311)
•
Rear Collision Warning (RCW) (p. 318)
•
City Safety warning level settings (p. 309)
•
City Safety in crossing traffic (p. 313)
•
Seat belts (p. 62)
•
City Safety when evasive action is not possi-
ble (p. 314)
City Safety warning level settings
City Safety is always activated but the function's
warning distance can be adjusted.
NOTE
City Safety cannot be turned off and activates
automatically each time the engine is started.