Volvo S 90 2017, Руководство пользователя

Страница: 130 / 570

||
INSTRUMENTS AND CONTROLS
* Option/accessory. 128
2. Press and release the
M
button. The indica-
tor light in the button will illuminate.
3. Press button
1
or
2 within 3 seconds
to
store the current position of the seat/
mirrors/head-up display in the selected but-
ton.
> When the position has been stored in the
selected button, an audible signal will
sound and the indicator light in the
M
but-
ton will go out.
If none of the buttons (1 or 2) are pressed within
3 seconds, the indicator light in the
M
button will
go out and the position will
not
be stored.
The seat/mirrors/head-up display must be
moved before new settings can be stored.
Using a stored position
A stored position can be used when one of the
front doors is opened or closed:
Front door open
–
Press one of the bottons (
1
or
2
) briefly. The
seat, door mirrors and head-up display will
move to the positions stored in that button.
Front door closed
–
Press and hold one of the buttons (
1
or
2
)
until the seat, door mirrors and head-up dis-
play have moved to the positions stored in
that button.
The seat, door mirrors and head-up display will
stop automatically if the button is released before
the they have reached the stored positions.
WARNING
•
Because the driver's seat can be adjusted
with the ignition off, children should never
be left unattended in the vehicle.
•
Movement of the seat can be STOPPED
at any time by pressing any button on the
power seat control panel.
•
Do not adjust the seat while driving. The
seat should be adjusted so that the brake
pedal can be depressed fully. In addition,
position the seat as far rearward as com-
fort and control allow.
•
The seat rails on the floor must not be
obstructed in any way when the seat is in
motion.
Related information
•
Adjusting power front seats
*
(p. 127)
•
Power front seats
*
(p. 126)
Multifunctional front seats
*
In addition to the adjustment settings offered by
the power seat controls, the multifunction control
provides additional possibilities for convenience
and comfort.
Multifunction control on the side of the seat
The multifunction control can be used to adjust
lumbar support
*
, the backrest's side bolsters
*
, the
length of the seat cushion and the massage
function
*
. The adjustment settings made with the
control are shown in the center display
*
and cer-
tain settings can be made directly from the cen-
ter display.
Center display
The adjustment settings for the driver and pas-
senger seats made using the multifunction con-
trol are shown in the center display. If only one
seat is adjusted, the settings are shown in the