manualshive.com logo in svg

Volvo B10M, Руководство пользователя


Поделиться
Скачать
background image

63

Driving

Tips for winter driving

Use winter fuel! It reduces the
risk of deposits in the fuel sys-
tem. The build up of condensa-
tion in the fuel tank can be
avoided by keeping the fuel
tank well filled.

Oils must have the correct vis-
cosity for winter use in order to
provide adequate lubrication
even in cold weather.

The cooling system must be
treated with antifreeze. This
must also include the wind-
screen and headlamp washer
reservoirs.

The battery should be in good
condition. Cold reduces the
capacity of the batteries.

If abnormal exhaust smoke
occurs, after-heat the en-
gine by pressing the cold
start button.

Depress the accelerator
carefully when pulling
away in case there are ice
patches. The reverse gear
differential can be dam-
aged if one of the drive
wheels spins.

There is no risk of this hap-
pening on buses with ASR.
They pull away with ”nor-
mal” acceleration. The
ASR system will make sure
the bus has optimum grip.

Does your bus have differ-
ential lock? See page 32
for how it is used.

Содержание B10M





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для B10M

Бренды по названию

Популярные бренды

Загрузить еще бренды