manualshive.com logo in svg

Volvo B10M, Руководство пользователя


Поделиться
Скачать
background image

28

Instruments and controls

Hand lever for retarder

Retarder

Buses with automatic transmission have the retarder inte-
grated in the gearbox and manual buses can be fitted with
an optional electromagnetic or hydraulic retarder.

The retarder is a complement to the ordinary braking sys-
tem. Correctly used, a retarder will increase the service life
of the wheel brake linings many times over.

The retarder has no braking effect when the wheels are sta-
tionary or rotating slowly. It can therefore not be used as a
parking brake or to lock the wheels.

The first stretch of travel when the brake is depressed, be-
fore the wheel brakes are applied, will activate the retarder.
See adjacent illustration.

To avoid problems on slippery roads, for example, the activa-
tion of the retarder 

via the brake pedal

 can be turned off with a

switch.

Many buses with retarder also have a lever on the dash-
board. The retarder will be engaged gradually as the lever
is pulled towards you.

Read more about braking with retarder in the chapter
”Driving”.

The retarder only affects the drive wheels and can there-

fore cause skidding in slippery conditions. Disconnect the

retarder function via the brake pedal with the switch and

do not use the hand lever on slippery roads.

Switch to interrupt retarder activation

via brake pedal

Braking
with retarder.

Braking with
both retarder and
wheel brakes.

Brake pedal

The indicator light is on
while retarder braking is
in progress.

Warning!

Содержание B10M





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для B10M

Бренды по названию

Популярные бренды

Загрузить еще бренды