manualshive.com logo in svg

Volvo B10M, Руководство пользователя


Поделиться
Скачать
background image

135

Rear axle

All final drives are single gear hypoid type with denomina-
tion EV85.

The speed of the bus at any given engine speed depends
on the type of gearbox, rear axle ratio and tyre dimension.
For comparison, the speed at 2000 rpm and 295/80-22.5"
tyres is shown here for various gearboxes and rear axle ra-
tios.

3.31:1 3.56:1 3.78:1 4.25:1 4.87:1 5.43:1

D863.3
D864.3

159

148

139

124

108

97

5HP500/

140

130

122

109

95

85

590/600
G8 E/MGS,

116

108

101

90

79

71

S6-85,
4HP500/590
The control system for the DH10 engine makes it possible to
limit the top speed to a desired value. Speed limitation is
available as an option for the THD102 engine.

Retarder

Automatic gearboxes have integrated hydraulic retarder.

Hydraulic retarder or electromagnetic retarder are availa-
ble as alternative options together with the G8 E/MGS gear-
box.

An electromagnetic retarder is available as an option to-
gether with the S6-85 gearbox.

Technical Data

Содержание B10M





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для B10M

Бренды по названию

Популярные бренды

Загрузить еще бренды