manualshive.com logo in svg

Volvo B10M, Руководство пользователя


Поделиться
Скачать
background image

113

Service and Maintenance

Oil change volume

9 l including oil filter.

Oil grades

–

Transmission fluid complying with Volvo STD 1273,05
specification 97305. (Example: SAE 80W/90 part no.
1161933 for 20 litre pack, 1161280 for 208 litre pack.)

alternatively:

–

Engine oil API CE, CF, CF-4 or CG-4 (ACEA E1-96, E2-
96 or E3-96). Only branded oil from well known manu-
facturers should be used. Recycled oil, so-called low-
price oil must not be used.

Recommended at low temperatures, see viscosity scale
note 3:

–

Volvo ”Synthetic oil” (part no. 1161904 for 20 litre pack,
1161906 for 208 litre pack).

Temperatures refer to constant ambient temperatures.

1. Transmission fluid.

2. When driving in temperatures above 30°C or when driving long

periods at altitudes over 2000 m above sea level, a
transmission fluid with viscosity SAE 85W/140 or SAE 140 is
recommended.

3. Volvo ”Synthetic oil” is recommended at low temperatures.

4. Engine oil. Note that multigrade oil must not be used.

-30 -20 -10

10

20

30

40

SAE 80W (1)

C

-22

-4

14

32

50

68

86

104 F

SAE 30 (4) 

SAE 40 (4)

SAE 80W/90 (1)

0

(3)

(2)

Содержание B10M





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для B10M

Бренды по названию

Популярные бренды

Загрузить еще бренды