Volvo 850 Скачать руководство пользователя страница 50

Страница: 50 / 147

Airbag (SRS) SIPS bag

The airbag and child seat do not go together!

SRS text at the end of the dashboard.

Inflation of SIPS bag

Child seat and child cushion!

Having a child safety seat in the front seat

can result in serious injury if an airbag is

fitted on the passenger side.

If the vehicle is also equipped with the SIPS

bag, it is recommended that the child is not

placed on a child cushion on the front seat.

The rear seat is the safest place for

children and child safety seats.

WARNING!

Never put a child safety seat in the front

passenger seat if the car has an airbag

(SRS) on the passenger side.

SIPS bag

The SIPS bag system is a mechanical system

consisting of two main parts - the airbag

module and the sensor unit. The airbag mo-

dule is located in the frame of the front seat

backrest. The sensor unit is located in a

sensor mounting in the end of the forward

SIPS tube. The sensor is not monitored by

the SRS system's diagnostic unit as it is a

mechanical system.

When inflated, the volume of the airbag is

approximately 12 1.

2: 20

Содержание 850




















































































































































Результаты поиска

Содержание 850

Отзывы:

Похожие инструкции для 850

Бренды по названию

Популярные бренды

Volvo 850, Руководство пользователя

Результаты поиска

Содержание 850

Отзывы:

Похожие инструкции для 850

Бренды по названию

Популярные бренды