background image

Folding seats - 4-door model

Rear centre seat belt

Pull the catch

Rear seat catch

Folding rear seat

Folding rear seat

The rear seat backrest is divided into two sec-

tions. Each section can be folded independently

of the other. This offers a variety of storage and

load alternatives.

Lift the rear seat belts to the fixed section

of the backrest. The centre seat belt can

also be folded across the fixed part of the

backrest so that it does not get in the way

when the right-hand backrest is folded.

 

Pull the catch forwards and fold the back-

rest.

The two red catches on the rear of the back-

rest are used to prevent unwanted use of the

backrest folding mechanism.

Push the catches down to lock the back-

rests.

The backrests cannot now be folded from

inside the car. This is a useful facility

if there are children in the car who might

otherwise tamper with the folding mechan-

ism from the rear seat, or if you lend the

car to someone and want to protect the

contents of the boot.

Note: With the catch in the locked posi-

tion, it is not possible to fold the rear seat

backrest from inside the car.

When pulling the backrests upright, make

sure that the seat belts are not caught and

twisted.

2:31

WARNING!

When you have folded the backrest up,

make sure that it has locked into place.

Содержание 850




















































































































































Отзывы: