Replacing bulbs
Left
Right
Left
Right
Left-hand lamp housing (right-hand housing is reversed)
Headlight bulb replacement
Bulbs are replaced from the engine compartment.
Note! Do not remove the connector before the bulb has been
removed from the lamp housing! Never touch the glass of bulbs.
Grease and oil from your fingers give off fumes when heated and
coat
the
reflector, quickly ruining it.
C: Press the spring-loaded clip towards the headlight housing glass
(1) and move it downwards (2). Then press the clip to the side (3).
Remove the bulb and connector.
Disconnect the connector.
It is important that the connector is correctly connected to the bulb.
See illustration. Insert the new bulb without touching the glass
with your fingers.
Refit in reverse order to remove.
Check that the bulb works.
Switch off the lights and turn the ignition key to position 0!
Open the bonnet.
Turn the plastic cover anti-clockwise and remove it.
The bulb on the right-hand side is replaced more easily if the
diagnostic unit and the pipe (A) are removed.
B: Press the spring-loaded clip towards the headlight housing glass
(1) and move it to the side (2). Then press the clip down (3).
Содержание 850
Страница 2: ...1 1 Instruments and controls ...
Страница 7: ...Headlights ...
Страница 22: ...Air distribution ...
Страница 132: ...Specifications Specifications This chapter contains data which you may find useful 8 1 ...