Volvo 850 Скачать руководство пользователя страница 55

Страница: 55 / 147

"Deadlock" locking position alarm

"Deadlock" locking position

(certain markets)

Your car has a special "deadlock" locking

position, which means that when the doors

are locked in this way, they cannot be opened

from inside the car. "Deadlock" locking can

be activated only from the front doors, not

from the boot.

All doors must be closed before "deadlock"

locking can be activated. When doors are

locked using lock buttons, the "deadlock"

locking position cannot be activated.

Turn the key in the usual way to lock the

doors (1). Turn it further to activate "dead-

lock" locking position (2). More resistance

will be felt at the last turn. This is perfectly

normal.

The doors cannot now be opened from the

inside. The car can only be unlocked from

outside via the front doors and the boot.

If you have a 5-door model, the rear door

should be in childproof mode when activa-

ting the "deadlock" locking position.

WARNING!

Be careful not to activate the "deadlock"

locking position if anyone is still in the

car! The doors cannot be opened from the

inside!

Alarm (extra equipment)

Cars with central locking can be fitted with

an alarm as extra equipment.

Note! The alarm system is activated when

the front doors are locked with the key*.

The alarm system is connected to the doors,

boot, bonnet and ignition switch. The alarm

can be deactivated by turning the key in

either of the front doors or the boot. A red

LED flashes on the upper side of the in-

strument panel to indicate that the alarm

has been activated. If an attempt has been

made to break into the car, the LED glows

steadily, until the ignition is switched on.
*Also the boot when not equipped with

"deadlock" locking position.

2: 25

Alarm system LED

Note!

If there is no power supply present in the car,

the central locking system will not function

and only the driver's door can be unlocked.

In this situation, the lock button will not be

visible even though the driver's door is un-

locked.

If your car is equipped with an alarm, this

will only be activated when the "deadlock"

locking position is activated, and the red

LED flashes. The "deadlock" locking

position and the alarm are not activated

when locking the boot.

If your car is equipped with remote control-

led central locking/alarm, you have to press

the LOCK button twice within three seconds

(although not too quickly) to activate the

"deadlock" locking position.

See page 2:26.

Содержание 850




















































































































































Результаты поиска

Содержание 850

Отзывы:

Похожие инструкции для 850

Бренды по названию

Популярные бренды

Volvo 850, Руководство пользователя

Результаты поиска

Содержание 850

Отзывы:

Похожие инструкции для 850

Бренды по названию

Популярные бренды