Volvo 850 Скачать руководство пользователя страница 69

Страница: 69 / 147

Load net

When putting away the net, reverse the procedure.

The load net can also be used when the rear seat is folded down, but

then an accessory mounting on the entry hand grip must be used.

2: 3 9

Load net (extra equipment)

load net is a useful accessory made of strong nylon mesh which un-

reels from the back of the rear seat.

The load net has to be positioned for use from the rear of the car.

Open the cover on the right seat back.

Pull out the load net towards you (1).

First hook the rod onto the mounting on the right side, then pull out

the rod and hook it in place on the left side (2&3).

Pull out the left load net and attach to rod (4).

Note! Make sure that the net hooks properly onto the hooks under

the rear door (5).

Содержание 850




















































































































































Результаты поиска

Содержание 850

Отзывы:

Похожие инструкции для 850

Бренды по названию

Популярные бренды

Volvo 850, Руководство пользователя

Результаты поиска

Содержание 850

Отзывы:

Похожие инструкции для 850

Бренды по названию

Популярные бренды