Volvo 2006 XC70, Руководство пользователя, Страница: 80 / 211

72
8503129m
Steel grid/Cargo net
Steel grid (accessory)
To remove the steel grid:
1. Fold down the entire rear seat backrest.
2. Press and turn the knobs on opposite ends of
the steel grid with a torx screwdriver until
the marks on the knobs are aligned with red
dots (1 in the inset illustration above).
3. The steel grid is spring loaded. Push the grid
toward the left (driver’s) side of the car to
release it from the retaining bracket on the
opposite side. Keep the grid straight when
performing this step so that it does not
become wedged in place.
4 Pull the opposite end of the grid out the
retaining bracket.
WARNING! When the steel grid is in-
stalled, make sure that the marks on the
knobs are aligned with the green dots (2 in
the inset illustration in the left column) ,
which indicates that the grid is locked in
place.
To install the steel grid, perform the steps in
the reverse order.
Cargo net (option on V70)
Models with 2-section rear seat
Your car can be equipped with a cargo net
made of strong nylon fabric that can be
unrolled from the rear seat backrest. After
being unrolled, the cargo net self-locks after
about a minute.
•
Pull up the right-hand cargo net.
•
First hook the rod in the bracket on the
right-hand side (A). Then pull the rod out
and hook it on the left-hand side (B).
•
Pull up the left-hand cargo net and secure it
to the rod.
•
To remove, proceed in reverse order.
NOTE: Make sure that the cargo net is
securely fastened in the hooks. To remove,
proceed in reverse order.
The cargo net can also be used when the
rear seat is folded forward.
Steel grid Cargo net
1
2
8504154m