192
HomeLink® Universal Transceiver (option)
8901344e
HomeLink®® Universal
Transceiver
Indicator light
Hand-held transmitter
HomeLink® Universal Transceiver
HomeLink® is an advanced system that can be programmed to learn the
codes of three different remote controlled-devices (e.g., garage door
openers, remote lighting, entry door lock). HomeLink®’s sun visor-
mounted transceiver, powered by your car’s electrical system, may then
be used in place of your hand-held remote controls.
NOTE:
For your security, the HomeLink® Universal Transceiver is
designed to
not
function if you lock your car from the
outside
.
Programming the transceiver
1. The ignition switch must be turned to the accessory position (II)
before programming the HomeLink® Universal Transceiver.
2. Begin by erasing all 3 factory default channels. Hold down the two
outside
buttons (buttons 1 and 3 in the illustration) on the
HomeLink® Universal Transceiver for about 20 seconds, until
HomeLink®s indicator light begins to flash. Then release the
buttons.
3. Hold your hand-held transmitter (garage door opener, for example)
2 to 5 in. (5 to 12 cm) away from the HomeLink® surface, keeping
the indicator light in view. For placement questions, contact
HomeLink® toll-free 1-800-355-3515 (Internet:
www.HomeLink.com).
4. Using two hands, push and hold both your hand-held transmitters
button
and
the transceiver button you wish to program.
The indicator light will flash first slowly, then rapidly. Rapid flashing
tells you the HomeLink® button has been successfully programmed.
Release both buttons.
5. If you are programming a rolling code-equipped device (e.g., garage
door opener or entry door lock), refer to Programming rolling
codes on the next page to complete the programming process.
Repeat steps 3 and 4 to program the other two transceiver buttons.
If, after several attempts, you are unable to successfully train the
HomeLink® Universal Transceiver to learn your hand-held
transmitters signal, contact HomeLink® toll-free 1-800-355-3515
(Internet: www.HomeLink.com).
WARNING!
•
If you use HomeLink® to open a garage door or gate, be sure no
one is near the gate or door while it is in motion.
•
Do not use the HomeLink® Universal Transceiver with any garage
door opener that lacks safety “stop” and “reverse” features as
required by federal safety standards. (This includes any garage door
opener model manufactured before April 1, 1982). A garage door
opener that cannot “detect” an object, signalling the door to “stop”
and “reverse” does not meet current federal safety standards. Using
a garage door opener without these features increases the risk of
serious injury or death. For more information on this matter, call
toll-free 1-800-355-3515 (Internet: www.HomeLink.com).
Содержание 2006 XC70
