Volvo 2006 XC70, Руководство пользователя

Страница: 45 / 211

37
Left-side steering wheel lever
Lever positions
1. Turn signals, lane change position
2. Turn signals, position for normal turns
3. High beam flash
4. Toggle between high and low beams, Home
Safe lighting
Turn signals
When turning
Move the lever as far up or down as possible
(to position 2) to start the turn signals. The
turn signals will be cancelled automatically by
the movement of the steering wheel, or the
lever can be returned to its initial position by
hand.
When changing lanes
The driver can flash the turn signals by
moving the turn signal lever up or down to
3602430m
position 1 and releasing it. The turn signals
will flash until the lever has been released.
NOTE: If the turn signal indicator flashes
faster than normal, check for a burned-out turn
signal bulb.
High/low beam headlights
Continuous high beams
•
Turn the ignition key to position II.
•
With the light switch (1) in position ,
(see page 35) pull the turn signal lever
toward the steering wheel (position 4) to
toggle between high and low beams (this
also applies on models equipped with the
optional Bi-Xenon headlights).
High beam flash
•
Turn the ignition key to position II.
•
Pull the turn signal lever to position 3. The
high beams will remain on until the lever is
released.
Home safe lighting
When you leave your car at night, you can
make use of the home safe lighting function to
illuminate the area in front of the car.
•
Remove the key from the ignition switch.
•
Pull the direction indicator lever as far as
possible towards the steering wheel (to
position 4) and release it.
•
Exit the car and lock the doors.
The headlights and parking lights will
illuminate and remain on for 30*, 60 or 90
seconds. The time interval can be changed by
an authorized Volvo retailer.
* Factory setting