Volvo 2006 XC70, Руководство пользователя

Страница: 67 / 211

59
Programming the driver’s seat memory
(option)*
Three different seating and door mirror
positions can be stored in the driver seat's
memory.
The following example explains how button 1
can be programmed.
Buttons 2 and 3 can be programmed in the
same way.
To program (store) a seat position in button
1:
1. Move the seat to the desired position using
the seat adjustment controls (see the
previous page).
2. Press and hold down the MEM (memory)
button.
3. With the MEM button depressed, press
button 1 briefly to store the seat's current
position.
To move the seat to the position that it was
in when button 1 was programmed:
Press and hold down button 1 until the seat
stops moving.
As a safety precaution, the seat will stop
automatically if the button is released before
the seat has reached the preset position.
* This option is only available on the driver’s
seat.
Front seats
Manually adjusted front seats
1. Front-rear adjustment: lift the bar and move
the seat to the position of your choice.
2. Raise/lower the front edge of the seat
cushion (option): use the control to pump
the front edge of the cushion up or down.
3. Raise/lower seat height: pump the seat up or
down
4. Lumbar support: turn the control for firmer
or softer lumbar support.
5. Backrest tilt: turn the control to adjust the
angle of the backrest.
6. Control panel for optional power seat (see
page 58 for more information).
WARNING!
•
Do not adjust the seat while driving. The
seat should be adjusted so that the brake
pedal can be depressed fully. In addition,
position the seat as far rearward as comfort
and control allow.
•
Check that the seat is securely locked into
position after adjusting.
8505040m