Volvo Penta D5 Скачать руководство пользователя | Manualshive

Страница: 17 / 80

background image

Running in the engine

The engine must be run in during the first 10 hours of
operation. Do this by using the engine in normal
operation, where full load is only applied for short
periods of time. Never run the engine at constant
speed for any longer periods of time.

Since oil consumption is higher during the running in
period, be sure to control the oil level more frequently
than normally recommended. See

Maintenance

for

more information.

Fuel, oils and coolant

Only use the fuels and oils recommended in the
Operator’s Manual, other viscosity and quality may
cause malfunctions, increased fuel consumption and
possibly shorten the life of the engine.

Always change the oil, oil filters and fuel filters at the
specified maintenance intervals.

Make sure to always use suitable and correctly mixed
coolant.

If an unsuitable coolant has been used, or if the
instructions for coolant mixture have not been
followed, future warranty claims related to engine and
accessories may be denied.

Maintenance and replacement parts

Volvo Penta engines are designed for maximum
reliability and long life and built to withstand a
demanding environment. The engines are also
designed to have a minimal environmental impact.
These qualities will be maintained through regular
servicing and the use of spare parts with the same
quality as genuine Volvo Penta parts. If reliable and
purpose-built parts are not used, your safety, health,
and the machine’s function may be compromised.
Volvo Penta has a world-wide network of authorized
dealers.

The authorized dealers are Volvo Penta product
specialists, and have the accessories, genuine parts,
test equipment and special tools needed for high
quality service and repair work. Always observe the
maintenance intervals in the manual, the complete
Service Protocol can be found at

volvopenta.com

.

Remember to note the engine / transmission
identification number when you

order service and

spare parts.

Introduction

47713336 03-2021 © AB VOLVO PENTA

15

«
...
15
16
17
18
19
...
»

Содержание D5

















































































Отзывы:

Нет отзывов

Похожие инструкции для D5

Бренд: HunterDouglas Страницы: 20

Neomat A Series

Бренд: Nice Страницы: 52

Бренд: Man Страницы: 132

Lombardini SILEO 1000

Бренд: Kohler Страницы: 168

Бренд: Rotax Страницы: 13

Бренд: MTU Страницы: 239

Бренд: Key Automation Страницы: 44

Бренд: Zenoah Страницы: 4

Бренд: Dietz Страницы: 10

Бренд: Dietz Страницы: 11

A50-10L Turnado

Бренд: Hacker Страницы: 4

Бренд: Hacker Страницы: 36

Бренд: PST Jets Страницы: 44

Бренд: Uebelhoer Bros Страницы: 12

Бренд: DANA Страницы: 3

Бренд: ST Страницы: 281

Бренд: panthera Страницы: 12

Бренд: Gleason Reel Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды