VOLTCRAFT 1528380, Руководство по эксплуатации

Страница: 39 / 48

39
17. System settings
The system settings of the charger summarise various basic settings. They are pre-applied with the most common
values in the delivery condition.
Depending on the rechargeable batteries you want to charge or discharge, however, certain changes to the values
are sensible.
Proceed as follows:
• Select the function "SYSTEM SET ->" in the main menu of the charger with
the button "INC." or "DEC.".
• Confirm the selection by pressing the "START/ENTER" button.
First, the break time between a charging/discharging process (e.g. in cycle
operation) is displayed; see figure on the right.
Use the buttons "INC." or "DEC." to select the desired setting functions.
If a setting is to be changed, briefly push the button "START/ENTER". The respectively adjustable value
flashes.
Change the flashing value with the buttons "INC." and "DEC.". Keep the respective button pressed for quick
adjustment.
Complete the setting by briefly pushing the "START/ENTER" button. The respective adjustable value stops
flashing. Then you can select another setting function, see above.
To return to the main menu, push the button "BATT. TYPE/STOP".
Observe the following information for description of the possible setting functions.
Pause duration between charging/discharging processes
When charging a rechargeable battery, it heats up (depending on the charging current). In cycle operation, the charger
may make a break between charging and discharging so that the rechargeable battery cools off before discharging
starts.
Safety timer
If charging starts, the internal safety timer starts as well. If the charger cannot detect whether the battery is fully
charged for whatever reason (e.g. with delta-U detection), the charge process is terminated automatically after a set
time if the safety timer is on. This protects the battery from overloading.
The safety timer can be switched on ("ON") or off ("OFF"); the time for the safety timer can also be changed.
Do not set the time too short, since the rechargeable battery cannot be fully charged then because the
safety timer will cancel charging.
PROGRAM SELECT
SYSTEM SET->
Rest Time
CHG>DCHG 10Min
Rest Time
CHG>DCHG 10Min
SAFETY TIMER
ON 120Min