VOLTCRAFT 1528380, Руководство по эксплуатации

Страница: 38 / 48

38
15. Voltage Display for Lithium Rechargeable Batteries
The charger can also display the current voltages of the cells of a lithium rechargeable battery (LiPo, LiIon, LiFe,
LiHV).
For this, the lithium rechargeable battery must have a balancer connection that must be connected to the
respective channel of the charger.
Proceed as follows:
• Select the function "LI BATT METER" in the main menu of the charger with
the button "INC." or "DEC.".
• Confirm the selection by pressing the "START/ENTER" button.
Then the voltage display appears.
• Use the buttons "INC." and "DEC." to switch between the individual voltages
and the total voltage or the maximum/minimum cell voltages.
The individual voltage displays depending on the cell number, of course.
The example figure on the right may be a 3-cell LiPo rechargeable battery
(or a multiple-cell LiPo rechargeable battery with defective cells or defective
balancer connections).
After switching with the buttons "INC." and "DEC.", the upper display line
shows the total voltage of the connected battery pack.
The lower display line shows the maximum cell voltage ("H") on the left and
the minimum cell voltage ("L") of all cells of the connected battery pack on
the right. This way, you can see the difference between the voltage situa-
tions of the cells at a glance.
You can return to the main menu using the "BATT. TYPE/STOP" button.
16. USB output
If the charger is connected to the voltage/current supply, a voltage of 5 V/DC as common for USB and a current of up
to 2.1 A are available at the USB-output.
You can use this output, e.g. to charge a mobile phone or a tablet computer.
PROGRAM SELECT
LI BATT METER
4.19 4.15 4.18 V
0.00 0.00 0.00 V
MAIN 12.52V
H4.190V L4.150V