VOLTCRAFT 1528380, Руководство по эксплуатации

Страница: 37 / 48

37
c) Loading Battery Data
• Select the function "BATT MEMORY" in the main menu of the charger with
the button "INC." or "DEC.".
• Confirm the selection by pressing the "START/ENTER" button. The memory
number flashes.
• Select one of the 10 memories with the buttons "INC." or "DEC.".
If there are data in the memory, the display will alternate, e.g., be-
tween the rechargeable battery type and the cell number, as well as
the charging and discharging current.
When the memory is empty, only "ENTER SET ->" is displayed.
• Load the battery data from the selected memory by pushing the button
"START/ENTER" for 3 seconds.
The display shows the message "ENTER CHARGE LOAD....."; the data are
then loaded and the desired charging/discharging programme can then be
started (push the button "START/ENTER" again for 3 seconds).
If you keep the button "START/ENTER" pushed for 3 seconds in an empty memory, the charger will start
selection/setting mode, see chapter 14. a).
PROGRAM SELECT
BATT MEMORY
[ BATT MEMORY 2]
ENTER SET->
ENTER CHARGE
LOAD....
[ BATT MEMORY 1]
LiPo 7.4V(2S)