VOLTCRAFT 1528380, Руководство по эксплуатации

Страница: 33 / 48

33
14. Saving/Loading Rechargeable Battery Data
The charger has 10 memory slots in which you can store often-used settings. For example, the data (cell number,
charging procedures, charging current) for 3 different LiPo flight batteries can be saved there, so that you do not have
to set them anew every time.
a) Saving Battery Data
• Select the function "BATT MEMORY" in the main menu of the charger with
the button "INC." or "DEC.".
• Confirm the selection by pressing the "START/ENTER" button. The memory
number flashes.
• Select one of the 10 memories with the buttons "INC." or "DEC.".
If there already are data in the memory, the display will alternate,
e.g., between the rechargeable battery type and the cell number, as
well as the charging and discharging current.
When the memory is empty, only "ENTER SET ->" is displayed.
• Confirm the selection of the memory number by pressing the "START/EN-
TER" button.
The rechargeable battery type is displayed first; see figure on the right.
• Use the buttons "INC." or "DEC." to select the desired setting functions (e.g. battery type, cell number, charging
current, etc.).
To leave or cancel setting mode (previously made settings will not be saved!), just push the button "BATT.
TYPE/STOP" repeatedly until you are back in the main menu.
• If a setting is to be changed, briefly push the button "START/ENTER". The respectively adjustable value flashes.
• Change the flashing value with the buttons "INC." and "DEC.". Keep the respective button pressed for quick adjust-
ment.
• Complete the setting by briefly pushing the "START/ENTER" button. The respective adjustable value stops flashing.
Then you can select another setting function, see above.
• If you want to save all previous settings in the memory selected at first, call
the setting function "SAVE PROGRAM" at the end with the buttons "INC."
and "DEC." and briefly push the button "START/ENTER".
If the settings are not saved via "SAVE PROGRAM", they will be lost!
• Then the display shows the indication with the flashing memory number again. You can now programme another
memory.
To end programming, push the button "BATT. TYPE/STOP". Then the charger goes back to the main menu.
PROGRAM SELECT
BATT MEMORY
[ BATT MEMORY 1]
ENTER SET->
BATT TYPE
LiPo
SAVE PROGRAM
ENTER