VOLTCRAFT 1528380, Руководство по эксплуатации

Страница: 32 / 48

32
• If the value for the discharging current must be changed, push the "START/ENTER" button. The discharging current
flashes. Change the discharging current using the buttons "INC." and "DEC.". Keep the respective button pressed
for quick adjustment.
• Confirm the set discharging current with the "START/ENTER" button.
• To begin the discharge process, keep the "START/ENTER" button pressed for longer (approx. 3 seconds).
If the settings are wrong, or if the charger detects a problem, an audio signal is emitted and the appropriate
information is shown on the display. You can stop the warning signal by pressing the "BATT. TYPE/STOP"
button. The charger then returns to the previous configuration menu.
The display shows, e.g., the following data while discharging:
The rechargeable battery type is shown in the upper left ("Pb" = lead bat-
tery), the upper middle shows the discharging current and the upper right
the current rechargeable battery voltage.
The lower left shows the current rechargeable battery programme ("DSC" = "DISCHARGE"), the middle the elapsed
discharging time and the discharged capacity is mAh is displayed to the right of this.
• Once the discharging process has been completed, an audio signal is emitted (if it was not turned off).
If you wish to cancel the discharging process, push the "BATT. TYPE/STOP" button.
P-6 0.4A 12.59V
DSC 022:45 00132