Vollrath STL-80SS, Руководство оператора, Страница: 45 / 74

42
5. Clean the bracket parts using detergent
water and brush if necessary, then rinse
thoroughly with warm water (108°F / 42°C).
6. Submerge the bracket in sanitizer solution
for at least 5 minutes.
7. Remove parts from the sanitizer solution
and place them on a sanitary tray to dry.
8. Install the bracket back onto the freezer
door post.
9. Reinstall the freezer door.
10. Install and tighten the freezer door knobs.
Area Under the Cabinet
1. Carefully move the cabinet to an area
outside of where it was sitting.
2. Clean the area using a single service towel
moistened with warm detergent water. Use
a brush if necessary.
3. Rinse area with a single service towel and
warm water (108°F / 42°C) and then wipe
dry with a dry single service towel.
4. Clean the outside and underside of the
cabinet using detergent, water and single
service towels.
5. Carefully return the cabinet to its original
place.