User Manual VAS 5054A V1.06 All rights reserved.
Page 25
VAS 5054A User Manual
4 Using the VAS 5054A with a Diagnostic Application
Start your diagnostic application. If no diagnostic application has been installed on your PC
before, a dialog box will be displayed when you start the application for the first time. In the
dialog box, enter the distribution center/importer number and the dealer number. Information on
how to obtain these numbers is provided in the documentation that came with your diagnostic
application.
If you have changed the PIN of the VAS 5054A, you are prompted to enter the new PIN in the
application PC. Type in the new PIN and confirm your entry.
The firmware is loaded into the VAS 5054A. This will take about a minute when you start the
application for the first time. The next time, your VAS 5054A will be available in a few seconds.
Note
As Bluetooth connections have a low bandwidth, processes involving the
transmission of large data volumes will take longer than with vehicle
interfaces connected directly to the PC.
Fig. 4-1 User interface of the VAS 5065 immediately after startup
After loading the VAS 5054A firmware, the startup screen of your diagnostic application is
displayed.
